Get a Quote for Your Business
Technical Specifications
| Property | Value |
|---|---|
| Product Type | Solvent Blend |
| SKU | QL-ALK-X6 |
| Base | No. 200 Mineral Spirits + Medium-Strength Solvents |
| Appearance | Clear, no suspended matter |
| Evaporation Rate | Moderate |
| Shelf Life | 12 months |
Compatible Products
| Product Type | Compatible Products |
|---|---|
| Primers | QL-ALK-ACP, QL-ALK-ACPP |
| Enamels | QL-ALK-EN/E |
| Clear Coats | QL-ALK-CV |
| Other | General oil-based coatings |
⚠️ NOT Compatible With
- Nitrocellulose lacquers
- Chlorinated rubber coatings
- QL-ALK-HF Hammer Finish Paint (requires dedicated thinner)
Application Guidelines
| Guideline | Instruction |
|---|---|
| Filtration | Filter before use if contamination present |
| Addition | Add gradually while stirring |
| Maximum Rate | Do not exceed TDS recommended ratio |
| Over-thinning | Reduces film build and performance |
| Cleaning | Clean equipment immediately after use |
Storage & Safety
| Requirement | Detail |
|---|---|
| Storage | Cool, well-ventilated, away from sunlight, sparks, heat |
| Container | Keep tightly sealed |
| Flammability | Highly flammable — keep away from sparks, flames, heat |
| Smoking | Strictly prohibited at worksite |
| Ventilation | Adequate ventilation required |
| PPE | Gloves, goggles, solvent-resistant clothing |
FAQ
What is this used for? Viscosity adjustment for alkyd and oil-based coatings.
Compatible products? QL-ALK-ACP, QL-ALK-ACPP, QL-ALK-EN/E, QL-ALK-CV.
Hammer finish? No, not compatible with QL-ALK-HF.
Cleaning equipment? Yes, suitable for cleaning spray equipment.
Safety? Highly flammable. Ventilation required. Wear PPE.
Request SDS or bulk quote.