Acrylic Enamel Economy Grade
Description
Formulated with modified acrylic resin, pigments, fillers, solvents, and additives. A single-component, ready-to-use topcoat offering a cost-effective solution for general industrial protective and decorative finishing. Available in a full range of colors with gloss options.
Recommended Uses
- Suitable for protective and decorative finishing of steel structures, machinery, equipment, and vehicles across a wide range of industrial applications. Provides good weather resistance and color retention for both interior and exterior environments.
Best For
- fast-drying industrial finishing
- machinery and equipment
- decorative metal coating
Buyer Benefits
- fast drying
- good decorative finish
- practical for production repainting and maintenance
Key Features
- Fast drying at ambient temperature
- Smooth, flat finish with good gloss retention
- Resistant to powdering and cracking
- Good adhesion to properly prepared substrates
- Wide color range available; gloss levels: high gloss, semi-gloss, matte
- Single-component, easy to apply
Typical Coating System
Typical acrylic system: compatible primer selected by substrate, followed by acrylic enamel or topcoat.
Technical Specifications
| Product Family | Acrylic |
| Coating Layer | Top |
| Component System | 1K or ready-to-use system, confirm from current TDS |
| Recommended Use Snapshot | Suitable for protective and decorative finishing of steel structures, machinery, equipment, and vehicles across a wide range of industrial... |
| Typical System | Typical acrylic system: compatible primer selected by substrate, followed by acrylic enamel or topcoat. |
Confirm current TDS/SDS, packaging, shelf life, and destination-market requirements before quotation or shipment.
Request Current TDS/SDSApplication Guide
| Surface Preparation | All surfaces must be clean, dry, and free of oil, grease, rust, and loose contamination before application. Adequate surface preparation is essential to ensure long-term adhesion and film performance. Abrasive Blasting: Sa2 or equivalent recommended Manual/Power Tool Cleaning: St3 minimum Apply primer coat before topcoat application |
| Application Method | Airless Spray (recommended): Nozzle orifice: 0.33–0.43 mm Fluid pressure: ≥ 15 MPa Conventional Spray: Suitable; not recommended for large areas Brush / Roller: Not recommended. If required, use a purpose-formulated version with a short-nap roller or soft brush to minimize bubbling. |
Compatible Products
Product FAQ
Can I request the current TDS and SDS for Acrylic Enamel Economy Grade?
Yes. Contact the Qilu Paints export team with the product name, destination country, and application environment to confirm current TDS/SDS, packaging, and export requirements.
How should Acrylic Enamel Economy Grade be selected for a coating system?
Confirm substrate, exposure environment, required durability, compatible primer or topcoat, and destination-market documentation before quotation or shipment.
What should be checked before applying Acrylic Enamel Economy Grade?
Check surface cleanliness, surface profile, ambient temperature, substrate temperature, dew point, and relative humidity before application. Stir thoroughly before use.
How should Acrylic Enamel Economy Grade be stored and handled?
Store sealed containers in a cool, dry, ventilated area away from heat, sparks, and direct sunlight. Follow the current SDS for PPE, ventilation, fire prevention, and waste disposal.
What should be checked before applying Acrylic Enamel Economy Grade?
Confirm substrate cleanliness, surface profile, dew point, ambient temperature, humidity, and compatibility with the primer or topcoat in the coating system.
How should Acrylic Enamel Economy Grade be mixed and applied?
Stir thoroughly before use. For multi-component products, mix base and curing agent according to the current TDS, observe induction time and pot life, and only thin with the recommended thinner.
How should unopened Acrylic Enamel Economy Grade be stored?
Store in sealed original containers in a cool, dry, ventilated place away from heat, sparks, and direct sunlight. Confirm shelf life and packaging with the current TDS/SDS before shipment.
What safety precautions are required during application?
Use suitable PPE, provide ventilation, keep away from ignition sources, and follow the current SDS for handling, fire protection, first aid, and waste disposal.
Product Data Source
This product page is generated from Qilu Paints legacy technical product records. Confirm SDS, TDS, export classification, packaging, and destination-market requirements with the sales and technical team before quotation or shipment.
Interested in This Product?
Contact us for detailed technical data sheets, pricing, and customized solutions for your application.