Acrylic Fast-Dry Enamel
Description
Formulated with acrylic resin, weather-resistant pigments, additives, and organic solvents. A single-component, fast-drying decorative and protective topcoat for metal substrates. Suitable for general industrial finishing and for the repair and renovation of pre-painted metal roofing (colour steel sheets).
Recommended Uses
- Designed for protective and decorative finishing of machinery, equipment, steel components, and fabricated metalwork. Also recommended as a maintenance and renovation coating for pre-painted colour steel roofing sheets (blue, grey, red, and other standard colours), where fast return-to-service is required.
- ⚠️ For metal roof applications: This product is intended for the repair and renovation of existing pre-painted metal roofing only — not for application over bare or heavily corroded steel without prior priming.
Best For
- fast-drying industrial finishing
- machinery and equipment
- decorative metal coating
Buyer Benefits
- fast drying
- good decorative finish
- practical for production repainting and maintenance
Key Features
- Fast drying: touch dry ≤ 30 minutes at 23°C
- Smooth, uniform finish
- Resistant to powdering and cracking
- Excellent adhesion to pre-painted and primed metal surfaces
- Good outdoor weather resistance and colour retention
- Single-component, easy to apply
- Available in a full range of colours including standard roof colours (blue, grey, red)
Typical Coating System
Typical acrylic system: compatible primer selected by substrate, followed by acrylic enamel or topcoat.
Technical Specifications
| Product Family | Acrylic |
| Coating Layer | Top |
| Component System | 1K or ready-to-use system, confirm from current TDS |
| Recommended Use Snapshot | Designed for protective and decorative finishing of machinery, equipment, steel components, and fabricated metalwork. Also recommended as a... |
| Typical System | Typical acrylic system: compatible primer selected by substrate, followed by acrylic enamel or topcoat. |
Confirm current TDS/SDS, packaging, shelf life, and destination-market requirements before quotation or shipment.
Request Current TDS/SDSApplication Guide
| Surface Preparation | General Metal Substrates: All surfaces must be clean, dry, and free of oil, grease, rust, and loose contamination. Abrasive Blasting: Sa2 or equivalent recommended Manual/Power Tool Cleaning: St3 minimum Apply compatible primer before topcoat Metal Roof Renovation: Remove loose rust, flaking paint, oil, and dust. Surface must be clean and dry. Where corrosion is present, remove rust thoroughly and apply one coat of epoxy anti-corrosive primer before topcoating. Sound, well-adhered existing paint may be overcoated directly after cleaning. |
| Application Method | Airless Spray (recommended): Nozzle orifice: 0.33–0.43 mm Fluid pressure: ≥ 15 MPa Conventional Spray: Suitable; not recommended for large areas Brush / Roller: Not recommended. If required, use a purpose-formulated version with a short-nap roller or soft brush to minimize bubbling. |
Compatible Products
Product FAQ
Can I request the current TDS and SDS for Acrylic Fast-Dry Enamel?
Yes. Contact the Qilu Paints export team with the product name, destination country, and application environment to confirm current TDS/SDS, packaging, and export requirements.
How should Acrylic Fast-Dry Enamel be selected for a coating system?
Confirm substrate, exposure environment, required durability, compatible primer or topcoat, and destination-market documentation before quotation or shipment.
What should be checked before applying Acrylic Fast-Dry Enamel?
Check surface cleanliness, surface profile, ambient temperature, substrate temperature, dew point, and relative humidity before application. Stir thoroughly before use.
How should Acrylic Fast-Dry Enamel be stored and handled?
Store sealed containers in a cool, dry, ventilated area away from heat, sparks, and direct sunlight. Follow the current SDS for PPE, ventilation, fire prevention, and waste disposal.
What should be checked before applying Acrylic Fast-Dry Enamel?
Confirm substrate cleanliness, surface profile, dew point, ambient temperature, humidity, and compatibility with the primer or topcoat in the coating system.
How should Acrylic Fast-Dry Enamel be mixed and applied?
Stir thoroughly before use. For multi-component products, mix base and curing agent according to the current TDS, observe induction time and pot life, and only thin with the recommended thinner.
How should unopened Acrylic Fast-Dry Enamel be stored?
Store in sealed original containers in a cool, dry, ventilated place away from heat, sparks, and direct sunlight. Confirm shelf life and packaging with the current TDS/SDS before shipment.
What safety precautions are required during application?
Use suitable PPE, provide ventilation, keep away from ignition sources, and follow the current SDS for handling, fire protection, first aid, and waste disposal.
Product Data Source
This product page is generated from Qilu Paints legacy technical product records. Confirm SDS, TDS, export classification, packaging, and destination-market requirements with the sales and technical team before quotation or shipment.
Interested in This Product?
Contact us for detailed technical data sheets, pricing, and customized solutions for your application.